- 關于我們
- 針對假冒留學監理網的聲明
- 留學熱線:4000-315-285
留學中介口碑查詢
阿爾伯塔大學-化學與材料工程理學碩士
Master of Science in Chemical and Materials Engineering(碩士)專業概況
Degrees are granted in Chemical Engineering, Materials Engineering, Process Control and Welding Engineering. Welding Engineering is not available at the doctoral level. The MEng degree is intended primarily for part-time students who are working in industry, but can also be taken by full-time students.
General fields for research in chemical engineering include fluid mechanics and rheology; reaction kinetics and catalysis; mass transfer and separation processes; heat transfer; thermodynamics, hydrocarbon P-V-T and phase equilibrium studies; polymer reactor engineering; computer process control; dynamic simulation; biotechnology, mathematical modelling and environmental engineering. Many research programs are oriented toward better utilization of natural resources in the province, e.g., upgrading of Athabasca bitumen and heavy oil feedstocks; processing of natural gas.
Active research areas in materials engineering include mineral processing; coal preparation; modelling and simulation; intelligent processing of materials and solidification processing; hydrometallurgy; pyrometallurgy; high temperature electrochemistry; corrosion; physical and mechanical metallurgy; process metallurgy; welding metallurgy; powder metallurgy; ancient materials; ceramic materials; and electronic materials. Active research areas in chemical process control include dynamic modeling, state and parameter estimation, model predictive control, fault monitoring and diagnosis and process optimization.
The MSc is a research-based program requiring the completion of a thesis.
The Department offers MSc degrees with specializations in Chemical Engineering, Process Control, Materials Engineering, and Welding Engineering.
Program Requirements
Students must successfully complete five courses (★12.5) and a thesis
Coursework(★12.5)
Four ★3 courses which must be approved by the Associate Chair (Graduate).
At least two must be 600-level or higher courses in the Department of Chemical and Materials Engineering. The following courses are considered to be equivalent to 600-level CME courses:
ECE 540
ECE 560
ECE 561
ECE 760
ECE 662
ECE 664
ECE 665
ENG M 646
MEC E 615
The remaining two courses must be at the 500-level or higher in the Faculty of Engineering, or be at the 400-level or higher in a Science department. Science courses at the 400-level must be approved by the Associate Chair (Graduate). The following courses are considered to be equivalent to 500-level Engineering courses:
ECE 450
ECE 457
Students specializing in Materials Engineering or Welding Engineering must take MAT E 640 (★3)- Advanced Materials Thermodynamics as one of their two 600-level courses
Reading or independent study courses will not count towards the total course requirements.
ENGG 600 (★0.5)- Engineering Ethics and Integrity
Thesis
Registration in 900-level THES.
Students are required to complete a thesis which embodies the results of independent research. All MSc students are required to deliver one public presentation on their research.
Length of Program
The maximum time to complete the thesis-based MSc program as set by the Faculty of Graduate Studies and Research is four years.
所屬院系
中國學生入學要求
想申請,但不知道自己能否成功申請這個專業?
留學監理網自2010年以來,服務了大量的學生,積累了大量的真實案例。輸入相應的自身情況如GPA、語言成績、學歷等,留學監理網幫你進行1對1精準評估并提供案例參考。課程信息
學制:全日制(4 年)
學費:CAD$8,700.00 (¥ 45,846) /年
開學時間:2022九月20日
申請截止日期:1-Oct-22
留學地點:University of AlbertaNorth Campus,116 Street and 85 Avenue,EDMONTON,Alberta (AB),T6G 2R3, Canada
留學監理網自成立以來,已真實服務大量學生。留學監理老師從業都5年以上,我們有足夠的經驗告訴你一個學校錄取你的幾率。
獲得國家軟件著作權注冊積累了大量經由留學監理網服務的學生和經審核的留學中介提供的真實案例。學生輸入相應的自身情況,可以匹配出相應案例,作為選擇院校和選擇留學中介的參考。
使用流程
填寫
自身情況
得出
案例
查詢申請結果
和辦理中介
留學監理網自成立以來,已真實服務大量學生。留學監理老師從業都5年以上,我們有足夠的經驗告訴你一個學校錄取你的幾率。
申請的這些學校怎么樣?點擊校名查看詳情
掃描二維碼查看申請錄取結果及辦理該案例的中介和顧問情況。好中介難找,好顧問更稀缺。
掃描二維碼,看錄取,約顧問
也可以通過以下方式查看錄取結果及辦理該案例的中介和顧問情況:
1.點擊“在線查詢”(非工作時間可以留言,注明 案例ID )
2.即刻撥打熱線電話 4000-315-285
登陸成功,歡迎使用留學監理網!